特殊喷嘴高度
有些人想使用Nordson喷嘴进行某些Foodini打印。不知道那是什么？别担心，在Foodini上使用它不是强制性的。但对于想要使用Nordson喷嘴的人，请继续阅读以了解如何将其与Foodini配合使用。
The special nozzle height setting in print preview is where you will indicate the height of your Nordson nozzle. Please note that printing with Nordson nozzles in Foodini requires a Nordson nozzle adapter from Natural Machines;
write to us
if you would like to enquire about purchasing.
In essence, the special nozzle height is equal to the total height of the Nordson nozzle.
However, it's always best to get a very accurate measure by
following the
Custom Printing Surface
instructions, at least for the first time you are using Nordson nozzles with your Foodini. There are three differences to note versus the instructions on that page:
1) In Step 1: Insert a Capsule in Bay 1, be sure to have your special nozzle on the capsule.
2) Only use the Foodini Glass Dish to measure the height of your custom nozzle.
3) When you determine the measurement, be sure to put the measurement in the special nozzle height box, and NOT in the surface height box.
This is very important as the special nozzle height also indicates to Foodini at what height to correctly do the ingredient test above the test cup, and will avoid hitting the test cup.
一些常用的Nordson喷嘴：
|
Nordson喷嘴类型 |
Foodini起始值
Special Nozzle Height + 2mm buffer
= starting point for custom print surface.
Follow Custom Printing Surface to fine-tune.
|
|
24 + 2 = 26
|
|
|
30 + 2 = 32
|
|
|
31 + 2 = 33
|
|
|
其他喷嘴尺寸
|
用尺子测量 + 2
|
Related Articles
打印预览
This page will describe the multiple options available on the print preview screen: 表面高度 You can print on top of the dish that comes with Foodini, or any other flat surface: another plate, a cake, etc. In all cases, the Foodini plate/dish should ...