特殊ノズル高さ
Nordsonノズルを使用して特定のFoodini印刷を行いたい方もいます。それが何か分からない？心配しないでください。Foodiniでの使用は必須ではありません。しかし、Nordsonノズルを使用したい方は、Foodiniでの使用方法を学ぶために読み進めてください。
The special nozzle height setting in print preview is where you will indicate the height of your Nordson nozzle. Please note that printing with Nordson nozzles in Foodini requires a Nordson nozzle adapter from Natural Machines;
write to us
if you would like to enquire about purchasing.
In essence, the special nozzle height is equal to the total height of the Nordson nozzle.
However, it's always best to get a very accurate measure by
following the
Custom Printing Surface
instructions, at least for the first time you are using Nordson nozzles with your Foodini. There are three differences to note versus the instructions on that page:
1) In Step 1: Insert a Capsule in Bay 1, be sure to have your special nozzle on the capsule.
2) Only use the Foodini Glass Dish to measure the height of your custom nozzle.
3) When you determine the measurement, be sure to put the measurement in the special nozzle height box, and NOT in the surface height box.
This is very important as the special nozzle height also indicates to Foodini at what height to correctly do the ingredient test above the test cup, and will avoid hitting the test cup.
よく使用されるNordsonノズル：
|
Nordsonノズルタイプ |
Foodiniの開始値
Special Nozzle Height + 2mm buffer
= starting point for custom print surface.
Follow Custom Printing Surface to fine-tune.
|
|
24 + 2 = 26
|
|
|
30 + 2 = 32
|
|
|
31 + 2 = 33
|
|
|
その他のノズルサイズ
|
定規で測定 + 2
|
Related Articles
印刷プレビュー
This page will describe the multiple options available on the print preview screen: 表面高さ You can print on top of the dish that comes with Foodini, or any other flat surface: another plate, a cake, etc. In all cases, the Foodini plate/dish should ...